CIRRUS – single nozzle atmospheric plasma

0 out of 5

Call for price

The Cirrus atmospheric plasma is single nozzle version device localised improvement of the adhesion characteristics of a wide range of materials.

It is a compact standalone instrument which delivers a continuous plume (8-10mm wide) of low temperature plasma to the surface and can easily be integrated with assembly/production lines with or without robot handling. The Cirrus operates with compressed air and doesn’t require any special gases or other services. A rear panel sub-D connector allows start/stop triggering of the plasma via an external signal supplied by the line.

Plasma zones can be applied to different areas or overlapped to cover wider areas.

Stock:On backorder

Porównaj

Description

The Cirrus atmospheric plasma is a single nozzle version device localised improvement of the adhesion characteristics of a wide range of materials including metals, polymers, ceramics and glass

It is a compact standalone instrument which delivers a continuous plume (8-10mm wide) of low temperature plasma to the surface and can easily be integrated with assembly/production lines with or without robot handling.

The Cirrus operates with compressed air and does not require any special gases or other services, it features an interlocked airflow regulation unit so that it does not require any external equipment.

A rear panel sub-D connector allows start/stop triggering of the plasma via an external signal supplied by the line to ensure smooth operation.

Plasma zones can be applied to different areas or overlapped to cover wider areas.

Atmospheric plasma advantages:

  • Fast localised atmospheric plasma pre-treatment of parts prior to bonding
  • Ultra-fine atmospheric plasma cleaning
  • Surface activation with atmospheric plasma
  • Highest quality treatments
  • Very low operation cost & easy integration with automated lines
  • Localised treatments
  • I/O subsystem for line integration
  • Integrated gas monitoring & control
  • Precise & repeatable
  • Treatment of polymers, glass, ceramics, metals
  • Compact benchtop or rack-mount unit

Relevant Plasma Treatments:

Plasma Cleaning prior to Wire Bonding,

Plasma Treatment Prior to Printing/Painting,

Plasma Surface Treatment of Composites,

Plasma Treatment of Medical Devices.

Technical Specifications

CONTROLLER

Dimensions W 483mm x H 177mm x L 451mm (+50mm on rear for cables)
Weight ~10kg, including plasma nozzle

PLASMA NOZZLE

Connection 3m flexible umbilical to controller rear
Weight  ~0.5kg
Dimensions Ø 32mm x L 210mm
Treatment width ~10-12mm with standard applicator “mode” nozzle
Gas/HV supply tube PVC-protection conduit
Ø 19mm
Length: 3m
Bend radius: min. 100mm

PLASMA POWER SUPPLY

Power 300W, nominal
Frequency  40 kHz
Interface Front panel – soft key pad
Control Manual mode with plasma switch from the front panel or remote mode through SUB-D connector on the rear panel (plasma on/off).

Automatic process control by plasma current and gas pressure control (on-board as standard).

Inputs/Outputs Inputs (24V)

Remote
Interlock
Plasma ON
Plasma OFF

Outputs (Normally Open Contacts)

System Ready
HV ON

SERVICES

Electrical  90-250 VAC, 50-60Hz, 1000 VA (including pump), fused 6.3 A T / 10 A T
Gas connection Dry and oil-free compressed air; 5 – 8 bar, approx. Gases 2000 l/h 6mm push-fit
Power cord Suited to region
Compliance CE – UKCA – ROHS – WEEE

NOZZLE OPTIONS

Finite nozzle ~8-10mm treatment area, for narrow channels
**Henniker strive for continuous improvement and specifications are subject to change without notice

 

You may also like…

X